HOT APPLICATION WITH WAXING IRON
1. Distribute the powder product evenly on the insole;
2. Melt the product by moving from tip to tail at a constant speed (about 3 cm per second) with the waxing iron at the recommended temperature of 160°;
3. Wait at least a few minutes to allow the insole to cool and the product to solidify;
4. If necessary, remove the excess of the solidified product with a well-sharpened spatula applying gentle pressure;
5. Free the base structure using a soft brass manual brush
6. Brush the insole with a manual or rotating stiff horsehair brush;
7. Brush the insole with a manual or rotating soft nylon brush;
8. Polish the insole with a 12mm merino wool roller.
It is recommended to overlay GM BOOST Powder on GM BASE Solid or Gel